ISO 16817 Building Environment Design
ISO 16817 Building Environment Design E-Learning
November 8, 2021
Getting IFS Brand
Getting IFS Brand E-Learning
November 8, 2021

Topics Of ISO 10012 Non-Medical Equipment Measurement Management E-Learning

Topics Of ISO 10012 Non-Medical Equipment Measurement Management

Virtual training on measurement management topics for non-medical equipment ISO 10012: This standard includes requirements as well as guidelines for the implementation of measurement management systems. And can be used to improve measurement activities and product quality. It is recommended that the management of all activities related to the subject of measurement in the organization be planned in a specific and codified process. The main purpose of this process can be considered to support the quality of products produced by the company.

Organizations have a responsibility to determine the level of control they need. Specify the requirements of the measurement management system. An effective measurement management system ensures that measuring equipment and measurement methods and methods are appropriate for their intended use. This is important in achieving product quality goals and managing the risk of incorrect measurements. The purpose of the measurement management system is to manage these hazards and risks.

Virtual Training Topics You will learn ISO 10012 non-medical equipment measurement management topics:

  • This standard specifies general requirements. Provides guidance for managing measurement processes and metrological validation of measurement equipment used to support and demonstrate compliance with metrological requirements.
  • Identifies measurement management systems that can be implemented by organizations that measure as part of the entire management system.
  • To be used to ensure that metrological requirements are met.

Objectives of the ISO 10012 Non-Medical Equipment Measurement Management Training Course:

  • Incorrect measurements do not cause any non-compliant and defective product to be accepted as a healthy product.
  • Occurrence of measurement errors does not cause healthy and compatible products to be mistakenly rejected and identified as defective products.
  • No measurement process is out of control for more than one day without identification. That is, if one of the measurement processes got out of control and its outputs were incorrect measurements. It does not take more than a day for the relevant staff to notice this situation.
  • There is no record of any unauthorized metrological verification.

Prerequisites for this course:

  • This course does not require special prerequisites and is taught from the ground up.

Leave a Reply

Your email address will not be published. Required fields are marked *